深圳市中立信电子科技有限公司

1 Features 3 Description

The TPS730 family of low-dropout (LDO) low-power

1• 200-mA RF Low-Dropout Regulator

With linear voltage regulators features high power-supply Enable rejection ratio (PSRR), low noise, fast start-up, and

• Available in Fixed Voltages from 1.8 V to 3.3 V excellent line and load transient responses in a small

and Adjustable Voltages (1.22 V to 5.5 V) SOT-23 package. NanoStar™ packaging gives an

• High PSRR (68 dB at 100 Hz) ultrasmall footprint as well as an ultralow profile and

package weight, making it ideal for portable • Low Noise (33 μVRMS, TPS73018)

applications such as handsets and PDAs. Each

• Fast Start-Up Time (50 μs) device in the family is stable, with a small, 2.2-μF

• Stable With a 2.2-μF Ceramic Capacitor ceramic capacitor on the output. The TPS730 family

• Excellent Load/Line Transient Response uses an advanced, proprietary BiCMOS fabrication

process to yield low dropout voltages (for example,

2 Applications the device is placed in standby mode, the supply

current is reduced to less than 1 μA. The TPS73018

• RF: VCOs, Receivers, ADCs exhibits approximately 33 μVRMS of output voltage

• Audio noise at 1.8 V output with a 0.01-μF bypass

• Cellular and Cordless Telephones capacitor. Applications with analog components that

are noise-sensitive, such as portable RF electronics, • Bluetooth®

, Wireless LAN benefit from the high PSRR and low-noise features

• Handheld Organizers, PDAs as well as the fast response time.

1特征3描述

TPS730系列低辍学率(LDO)低功率

1•200毫安射频低辍学率调节器

线性稳压器的特点是高电源允许拒绝比率(PSRR)，低噪音，快速启动，和

•可提供1.8 V至3.3 V的固定电压，线路性能优良，负载瞬态响应小

和可调电压(1.22 V至5.5 V) SOT-23封装。NanoStar™包装了

•高PSRR (68 dB, 100 Hz)超声足迹以及超低轮廓和

包的重量,使它适合便携式•低噪声(33μVRMS,TPS73018)

手机和pda等应用程序。每一个

•快速启动时间(50μs)设备在家庭中是稳定的,与一个小2.2 -μf

•稳定2.2 -μf陶瓷电容器陶瓷电容器的输出。TPS730家族

良好的负载/线路瞬态响应采用先进的、专有的BiCMOS工艺

产生低电压的过程(例如，

应用设备处于待机状态，电源供应

电流降低到小于1μA。的TPS73018

•射频:配装,接收器,adc展览约33μVRMS的输出电压

•音频噪声为1.8 V输出0.01 -μf绕过

•蜂窝和无绳电话电容器。应用程序与模拟组件

噪声敏感,如便携式射频电子、•蓝牙®吗

，无线局域网得益于高PSRR和低噪音特性

•手持组织者，pda以及快速响应时间。