深圳市中立信电子科技有限公司

TXS0104EDR
1 Features

1• No Direction-Control Signal Needed

• Max Data Rates

– 24 Mbps (Push Pull)

– 2 Mbps (Open Drain)

TXS0104EDR• Available in the Texas Instruments NanoFree™

Package

TXS0104EDR• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B

port (VCCA ≤ VCCB)

TXS0104EDR• No Power-Supply Sequencing Required – VCCA or

VCCB Can Be Ramped First

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

– A Port

– 2000-V Human-Body Model (A114-B)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

– B Port

– 15-kV Human-Body Model (A114-B)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

• IEC 61000-4-2 ESD (B Port)

– ±8-kV Contact Discharge

– ±10-kV Air-Gap Discharge

2 Applications

• Handset

• Smartphone

• Tablet

• Desktop PC

3 Description

This 4-bit non-inverting translator uses two separate

configurable power-supply rails. The A port is

designed to track VCCA. VCCA accepts any supply

voltage from 1.65 V to 3.6 V. VCCA must be less than

or equal to VCCB. The B port is designed to track

VCCB. VCCB accepts any supply voltage from 2.3 V to

5.5 V. This allows for low-voltage bidirectional

translation between any of the 1.8-V, 2.5-V, 3.3-V,

and 5-V voltage nodes.

When the output-enable (OE) input is low, all outputs

are placed in the high-impedance state.

The TXS0104E is designed so that the OE input

circuit is supplied by VCCA.

To ensure the high-impedance state during power up

or power down, OE should be tied to GND through a

pulldown resistor; the minimum value of the resistor is

determined by the current-sourcing capability of the

driver.